Noise And Vibration Information - Festool RUTSCHER RTS 400 Q Manual De Instrucciones Original

Orbital sander
Technical data
Power
Speed
Working strokes
Sanding stroke
Sanding pad
Weight
Degree of protection
The specifi ed illustrations can be found at the be-
ginning of the operating instructions.
Symbols
Warning of general danger
Wear ear protection!
Read the Operating Instructions/Notes!
1 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, stone, composite materials,
paint/varnish, fi ller and similar materials. Metal
and materials containing asbestos must not be
processed.
The machine is particularly suitable for processing
smaller surfaces and overhead work because of its
size, its weight and its output.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General Safety Rules
WARNING! Read all safety warnings and
all instructions. Failure to follow the warn-
ings and instructions may result in electric shock,
fi re and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
RTS 400 Q
200 W
14,000 rpm
28,000 rpm
2.0 mm
80 x 130 mm
1.1 kg (excluding cable)
2.2 Tool-specifi c safety rules
- Always wear protective goggles because of pos-
sible dangers when sanding.
- The manufacturer's handling and processing
instructions must be observed without fail if ex-
plosive or self-igniting dusts are likely to occur
during sanding.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, especially
inhaling them, can represent a hazard for operat-
ing personnel or persons in the vicinity. Comply
with the safety regulations that apply in your
country. Connect the electric power tool to a suit-
able extraction system. To protect your health,
wear a P2 protective mask.
2.3

Noise and vibration information

The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels (vector sum for three
directions) measured in accordance with EN
60745:
Vibration emission level (3-axis)
Uncertainty
The specifi ed emissions values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with
other insertion tools or if not maintained adequat-
ely. Take note of idling and downtimes of machine!
9
RTS 400 EQ
5,000 - 14,000 rpm
10,000 - 28,000 rpm
/ II
a
K = 2.0 m/s²
70 dB(A)
81 dB(A)
K = 3 dB
2
= 4.0 m/s
h