General Safety; Noise And Vibration Information - Festool RS 100 Q Manual De Instrucciones Original/Lista De Piezas De Repuesto

Orbital sander
Technical data
Power
Speed
Working strokes
Sanding stroke
Sanding shoe
Weight (excluding cable)
Degree of protection
The specifi ed illustrations can be found at the
beginning of the operating instructions.
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Read the Operating Instructions/Notes!
Wear ear protection!
1 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, metal, stone, composite materi-
als, paint/varnish, fi ller and similar materials.
Materials containing asbestos must not be proc-
essed.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1

General Safety

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2
RS 100 CQ
620 W
6300 rpm
- The manufacturer's handling and processing
12600 rpm
instructions must be observed without fail if
5.0 mm
explosive or self-igniting dusts are likely to oc-
115 x 221 mm
cur during sanding.
3.1 kg
- Harmful/toxic dusts can occur during your work
II
/
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
2.3
The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Overall vibration levels (vector sum for three direc-
tions) measured in accordance with EN 60745:
Vibration emission level
(3 directions)
Additional handle
Uncertainty
The emission values specifi ed (vibration, noise)
were measured in accordance with the test condi-
tions stipulated in EN 60745 and are intended for
machine comparisons. They are also used for mak-
ing preliminary estimates regarding vibration and
noise loads during operation. The emission values
specifi ed refer to the main applications for which
the power tool is used.
If the electric power tool is used for other ap-
plications, with other tools or is not maintained
suffi ciently prior to operation, however, the vibra-
tion and noise load may be higher when the tool is
used. Take into account any machine idling times
and downtimes to estimate these values more
accurately for a specifi ed time period. This may
signifi cantly reduce the load during the machine
operating period.
9
Tool-specifi c safety rules
Always wear protective goggles because
of possible dangers when sanding.
To protect your health, wear a P2 protec-
tive mask.

Noise and vibration information

Wear ear protection!
80 dB(A)
91 dB(A)
K = 3 dB
a = 3,5 m/s 2
h
2
a = 4,5 m/s
h
K = 2,0 m/s 2