Noise And Vibration Information - Festool RS 300 Q Manual De Instrucciones Original

Orbital sander
Technical data
Power
Speed
Working strokes
Sanding stroke
Sanding shoe
Weight (excluding cable)
Degree of protection
The specifi ed illustrations can be found at the beginning of the operating instructions.
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Wear ear protection!
Read the Operating Instructions/Notes!
1 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, stone, composite materials,
paint/varnish, fi ller and similar materials.
Metal and materials containing asbestos must
not be processed.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General Safety
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
RS 300 EQ
280 W
4 000-10 000 rpm
8 000-20 000 rpm
2.4 mm
93 x 175 mm
2.3 kg
II
/
2.2 Tool-specifi c safety rules
Always wear protective goggles because
of possible dangers when sanding.
- The manufacturer's handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2 protec-
tive mask.
2.3

Noise and vibration information

The typical values determined in accordance with
EN 60745 are:
Sound-pressure level
Sound-power level
Measuring uncertainty allowance
Wear ear protection!
Overall vibration levels (vector sum for three direc-
tions) measured in accordance with EN 60745:
Vibration emission level
(3 directions)
Uncertainty
The emission values specifi ed (vibration, noise)
were measured in accordance with the test condi-
tions stipulated in EN 60745 and are intended for
machine comparisons. They are also used for mak-
ing preliminary estimates regarding vibration and
noise loads during operation. The emission values
specifi ed refer to the main applications for which
10
RS 300 Q
280 W
10 000 rpm
20 000 rpm
2.4 mm
93 x 175 mm
2.3 kg
II
/
76 dB(A)
87 dB(A)
K = 3 dB
a = 4,5 m/s
h
K = 2,0 m/s
2
2