Irritrol TOTAL CONTROL 6 Guía De Instalación Y Programación página 16

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To set a watering day schedule for each program:
1. Turn the function dial to the
display will show the current watering day schedule for the
selected program.
2. Select Program
3. Set the watering day(s) for the program using one of the three
following procedures: Days of the Week, Odd Days/Even Days or
Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule
for each program.
Days of the Week
. Press the
A
shown at the top of the display.
. Press the
B
. To select the day, press the
C
from the schedule, press the
. Press the
D
. Repeat steps
E
Odd Days or Even Days
. Press the
A
displayed.
. Press the
B
Optional: To remove selected days of the week from the
Odd/Even watering schedule:
. Press the
1
flashing.
. Press the
2
(Press the
Day Interval
. Press the
A
displayed.
. Press the
B
. Press the
C
Interval number (1–30).
Programming the Controller
14
Watering Days
,
,
or
with the
A
B
C
D
Program
button until the weekday abbreviations are
NEXT
button.
(Sunday) will begin flashing.
ON
SUN
button. To remove the day
ON
OFF
button to select the next day.
NEXT
and
to set the remaining days of the week.
C
D
button until
NEXT
ODD DAYS
button to select the schedule.
ON
button until the selected day begins
NEXT
button to exclude the day from the schedule.
OFF
button to restore the day to the schedule.)
ON
button until the
NEXT
button to select this option.
ON
button. The display shows the current Day
NEXT
position. The
switch.
button.
or
is
EVEN DAYS
option is
DAY INTERVAL

Publicidad

Tabla de contenido
loading

Tabla de contenido