Manual Operations - Irritrol TOTAL CONTROL 6 Guía De Instalación Y Programación

MANUAL OPERATIONS

Manual operation
automatic watering programs as needed. The Total Control provides
separate dial positions for each type of operation: Single Station and
Program Cycle.
SINGLE STATION
This option enables individual stations to be operated for an untimed
duration (turned On/Off) or operated for a selectable duration from
one minute to 10 hours.
1. Turn the function dial to the
2. Select Program
Note: The programmed status of the master valve/pump start in
the selected program determines whether the master valve/pump
start will be activated with the manual operation
3. Use one of the following options to operate the station.
For untimed operation:
. Press the
A
wish to operate.
. Press the
B
until one of the following occurs:
•The
OFF
•The controller clock passes midnight
•The function dial is moved to another position
For timed operation:
. Press the
A
wish to operate.
. Use the + and/or – buttons to set the desired amount of station
B
run time (for this operation only), from one minute to 10 hours.
. To select additional stations to operate in sequence, repeat steps
C
and
A B
order they were selected.
. Leave the function dial in the
D
manual operation
Run
Operating the Controller
16
allows you to run individual stations or start
Single Station
, , or with the
A B C D
button as necessary to display the station you
NEXT
button. The station will turn on and remain on
ON
button is pressed
button as necessary to display a station you
NEXT
as desired. Each station will operate one-by-one in the
Single Station
is complete, then return the dial to the
position.
position.
switch.
Program
.
position until the