Starting Up; Instructions For Use; Instructions For Use Glass Ceramic; Turning On Glass Ceramic - Lotus PCC-4EM Guia Para La Intalación E Instrucciones De Uso

Attention! The manufacturer will neither be held responsible for, nor will give any compensation during the guarantee
period for any damage caused, and which is due to inadequate installations not compliant with the instructions.
Before using the appliance for the first cooking, it is necessary to clean it carefully, (see paragraph "cleaning and care").
Check the connection of the appliance and start it up following the instructions.
The first time the hotplate is used, it is advisable to turn on for a few minutes, and at maximum power, all the hotplates,
in order to dry out any humidity in the insulating mass of the elements.
Attention: - Use the appliance only under surveillance.
- Never turn on the electric hotplate without a pan;
- The pan must have a smooth bottom with an adequate diameter for the hotplate (never smaller).
Indications:- Each hotplate is connected to a commutator (selector) with 6 positions to allow to chose from 6 different
temperatures.
- Each hotplate is provided with a temperature limiter which interrupts the electrical current as soon
as 450°C is reached.
Any kind of food (meat, legumes, fish, rice, eggs, vegetables, etc.) can be cooked on the hotplates, providing suitable
pans are used.
Attention! - Use the appliance only under surveillance.
- Remember that whilst using glass ceramic tops, the crystal surfaces in the cooking area, increase the
temperature considerably; it is therefore necessary to take this into consideration and act accordingly.
- It is advisable to use recipients with a flat bottom, as recipients with concave or rounded bottoms
increase cooking time and energy consumption.
Indications: Each hotplate is connected to an energy regulator (selector), giving the possibility to choose from 6
different temperatures. For the first cooking, it is advisable to use the highest temperatures..
- each hotplate is provided with a temperature limiter which comes into function when the temperature
reached may damage the crystal.
- When the crystal surface heats up, the residuous heat light comes on, corresponding to the hotplate in
function. This indicator does not go off until the crystal maintains a high temperature, even with the
hotplate turned off so as to avoid danger of burns.
Warnings: Do not use pans or any recipient with the bottom in aluminium or with a tin coating.
Do not use terracotta pots as they could break or crack and therefore become unhygienic. It is
advisable to use stainless steel pans with a smooth, flat bottom and with an adequate diameter for the
heating area. If cast-iron pans are used, be careful not to slide them on the crystal, in order to avoid any
scratches. Make sure that the bottom of the pans has been dried well before placing them on the top;
avoid banging the crystal, especially with sharp or pointed objects.
Pay attention never to cover the crystal with sheets of aluminium paper or anything similar, during use.
Any kind of food (meat, fish, legumes, eggs, rice, vegetables, etc.) can be cooked on the glass ceramic coking tops,
providing suitable pans are used.
Switch on the main switch installed above the appliance. Turn the control knob corresponding to the hotplate from
position "0" to the degree of heating desired, between 1 and 6. The light comes on, as son as the power supply is on.
The green light indicates the presence of electrical tension. To turn off the hotplate, turn the knob back into position
"0". The hotplates are made up of a nucleus and a crown.
By turning the knob as indicated above only the nucleus of the hotplate is turned on; by turning the knob beyond
position "6" the crown is also turned on and you can adjust the temperature from position "1" to position "6" again.
Turning the knob, as indicated above, only the nucleus of the hotplate comes on; turning the knob beyond position "6",
the crown also comes on and the temperature can, once again be regulated from pos. "1" to pos. "6".
GB
IT

STARTING UP

INSTRUCTIONS FOR USE

INSTRUCTIONS FOR USE GLASS CERAMIC

TURNING ON GLASS CERAMIC

IE
CH
20