Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with the disc.
Connect the AC adaptor or install the battery
pack.
x
H
VOL
P O
W E
R
1
2
4
5
7
8
0
1
Open the player's LCD panel.
Set the LINE SELECT switch on the
player's right side to "OUT".
DISPLAY
MENU
RETURN
OPTIONS
POWER
CHARGE
C H
A R
G E
L D
H O
OPEN
\/1/HOLD
\/1
3
6
9
H
x
2
Press [/1 on the remote or slide
the [/1/HOLD switch of the player
to "[/1."
The player turns on and the POWER
indicator lights up in green.
3
Press OPEN to open the disc lid.
4
Insert the disc to be played.
Push with the playback side down until it
clicks.
Playback side facing down
5
Push the PUSH CLOSE on the
player to shut the disc lid.
6
Press H.
Playback starts.
• Some discs may start playing
automatically after the disc lid is shut.
• Depending on the disc, a menu may
appear on the screen. For DVD
VIDEOs, see page 17. For VIDEO
CDs, see page 20.
• After all titles have been played, the
player will stop itself and the display
will return to the menu screen.
Notes
• If the disc is inserted with playback side up, a "No
Disc" or "Cannot play this disc." message
appears.
• Discs created on DVD recorders must be correctly
finalized to play on this player. For more
information about finalizing, refer to the
operating instructions supplied with the DVD
recorder.
• The disc may be still spinning when the disc lid is
opened. Wait until the spinning stops before
removing the disc.
15
,continued
GB