Keys And Symbols - Fronius Galvo 2.5-1 208-240 Manual De Instrucciones

Keys and symbols

Keys and Sym-
bols
Item
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
16
(1)
(2)
(3)
(4)
(5)
Description
Display
for displaying values, settings, and menus
Control and Status LEDs
General Status LED (red)
indicates
- when a status code is shown on the display
- interruption of grid power feed operation
- during troubleshooting (the inverter is waiting to be reset or for an error to
be corrected).
Startup LED (orange)
indicates
- if the inverter will enter the automatic startup or self test phase (as soon as
the solar modules yield sufficient power output after sunrise)
- if the inverter has been set to standby operation in the Setup menu (= man-
ual shutoff of operation)
- when the inverter software is being updated.
Operating Status LED (green)
indicates
- if the photovoltaic system is working fault-free following the automatic start-
up phase of the inverter
- when the grid power feed operation is taking place.
Function keys – each has a different function depending on the selection:
"Left/Up" key
for navigating left and up
"Down/Right" key
for navigating down and right
"Menu/Esc" key
for switching to the menu level
to exit the Setup menu
"Enter" key
for confirming a selection
(6) (7) (8)