Fronius Galvo 2.5-1 208-240 Manual De Instrucciones página 41

- Threshold error:
to set an insulation threshold under which the inverter displays an error message
and interrupts feed-in
0–1000 kOhm (depends on the country setup)
TOTAL Reset
resets the max. and min. voltage values and the max. power of feeding in in the LOG
menu item to zero.
Once you have reset the values, this cannot be undone.
To reset the values to zero, press the "Enter" key.
"CONFIRM" is displayed.
Press the "Enter" key again.
The values are reset and the menu is displayed.
39