Tool Loading Safety; Operational Safety; Trigger Operated; Replacement Parts - Bostitch DSW-3519 Manual De Operación Y De Mantenimiento

TOOL LOADING SAFETY

When loading tool: 1) Never place a hand or any part of body
in fastener discharge area of tool; 2) Never point tool at anyone; 3) Do not
pull the trigger or depress the safety lever as accidental actuation may occur,
possibly causing injury.

OPERATIONAL SAFETY

Always handle the tool with care: 1) Never engage in horseplay;
2) Never pull the trigger unless nose is directed toward the work; 3) Keep others
a safe distance from the tool while tool is in operation as accidental actuation
may occur, possibly causing injury.
Keep hands and body away from the discharge area of the tool.
Do not drive fasteners on top of other fasteners or with the tool
at an overly steep angle as this may cause deflection of fasteners which could
cause injury.
This stapler produces SPARKS during operation. NEVER use the
stapler near flammable substances, gases or vapors including lacquer, paint,
benzine, thinner, gasoline, adhesives, mastics, glues or any other material that
is -- or the vapors, fumes or by-products of which are -- flammable, combustible
or explosive. Using the stapler in any such environment could cause an
EXPLOSION resulting in personal injury or death to user and bystanders.

Trigger Operated

This is a trigger operated tool when the safety lever is depressed. The trigger operated
tool will cycle every time the trigger is actuated when the safety lever is depressed.

Replacement parts

Use only BOSTITCH replacement parts. Do not use modified parts.

SYMBOLS

• The label on your tool may include the following symbols. The symbols and their
definitions are as follows:
V .....................volts
A .....................amperes
Hz ...................hertz
W ....................watts
or DC .....direct current
or AC/DC .. alternating or direct
current
or AC .........alternating current
....................safety alert symbol
................... Class II Construction
................... earthing terminal
A ...................Ampere hours
h
Wh ..................Watt hours
6-ENG
(double insulated)