Beninca EVA.8 Manual De Instalación página 63

• Do not stand within the gate movement area.
• Children must not play with controls and near the gate.
• In the event of malfunctions, do not attempt to repair the failure but contact the specialised personnel.
Should a power failure occur or in the event of faults in the system, the beam can be released and moved by hand:
• Introduce the customized key in the release lever and turn it clockwise.
• Turn the release lever anti-clockwise until the beam is released and it can be opened and closed by hand.
• To reset the automatic operation, turn the lever clockwise until the beam is released. Reset the initial position.
• Every month check the good operation of the emergency manual release.
• It is mandatory not to carry out extraordinary maintenance or repairs as accidents may be caused.These operations must be carried
out by qualified personnel only.
• The operator is maintenance free but it is necessary to check periodically if the safety devices and the other components of the
automation system work properly. Wear and tear of some components could cause dangers.
As indicated by the symbol shown, it is forbidden to dispose this product as normal urban waste as some parts
might be harmful for environment and human health, if they are disposed of incorrectly. Therefore, the device should
be disposed in special collection platforms or given back to the reseller if a new and similar device is purchased.
An incorrect disposal of the device will result in fines applied to the user, as provided for by regulations in force.
USER'S HANDBOOK
SAFETY MEASURES
MANUAL AND EMERGENCY MANOEUVRE
MAINTENANCE
WASTE DISPOSAL
CLACK!
EVA.8
63