Peltor PowerCom plus II Instrucciones De Uso página 3

PELTOR PowerCom plus II HEADSETS, CSA CERTIFIED AND APPROVED BY FM
APPROVAL FOR USE IN HAZARDOUS LOCATIONS
MODELS:
MT53H7A4720 - Head Band Version
MT53H7B4720 - Neck Band Version
MT53H7P3E4720 – Version with attachment for use with hardhat
CSA AND FM LISTINGS:
• Certified by CSA as Intrinsically Safe for Use in Hazardous Locations Class I,
Div 1, Groups A, B, C and D; Class II, Groups G, Coal Dust; Class III
• Approved by Factory Mutual as Intrinsically Safe for Use in Hazardous Locations Class I,
Div 1, Groups A, B, C and D.
APPLICABLE STANDARDS:
• CAN/CSA Standard C22.2 No. 157 – 92
• CANADIAN ELECTRICAL CODE, Part I
• FM 3600 & FM 360
• NATIONAL ELECTRICAL CODE (USA)
WARNING:
Substitution of components may impair intrinsic safety
Equipment with broken or otherwise damaged enclosure shall not be operated in the hazardous
locations.
Use only Peltor battery pack ACK05
or DURACELL MN500, DURACELL PROCELL PC500, ENERGIZER E9,
ENERGIZER INDUSTRIAL EN9 (.5V disposable batteries).
Do not mix different manufacturers batteries or mix new with used batteries
Change batteries only in locations known to be non hazardous