Peltor PowerCom plus II Instrucciones De Uso página 8

Tip(s)
1) In order to communicate properly, all headsets in the group must be on the same main channel and
same sub-channel.
POWER
This mode allows the selection of three transmitting power levels. When (+) is pressed, a voice confirmation
will follow and the headset will adjust to a higher output power transmitting mode. When the (-) is pressed,
a voice confirmation will follow and the headset will adjust to a lower output power transmitting mode.
Tip(s)
1) This mode can be used as a battery conservation feature
2) Depending on distance transmitting, high power setting is not always required for good coverage.
Evaluate units in environment to be used for optimum setting.
3) The high setting will consume more battery power than the low setting.
LANGUAGE
This mode allows the selection of voice confirmations in the headset to be in one of three languages:
English, French or Spanish. By pressing the (+) (-) keys while in this mode the languages will scroll up
and down accordingly. A voice message will confirm language selected.
Notes:
1) The mode will revert back to Surround Volume Mode (in PowerCom plus II headsets) and Radio
Volume mode (in
within 5 seconds while making selections. A beep will be heard in the headset indicating mode has
automatically reverted.
2) The headsets will also automatically shut-off if one of the following buttons (0) (+) (-) (PTT/VOX) is
not pressed within a span of 2 hours.
PUSH-TO-TALK (PTT) BUTTON FUNCTIONALITY
Located on the backside of the right ear cup, pressing this button keys up the lip microphone and enables
radio transmission manually. The radio will transmit, and the lip microphone will stay open as long as
the button is pressed.
VOX DISABLE FEATURE-Short cut
Double clicking the PTT button quickly will disable the vox feature, confirmed by a voice message
"VOX off" in the headset. To reactivate, double click the PTT button again and the vox will be enabled,
confirmed by a voice message "VOX on" in the headset.
Tip: Excellent feature to use if operator moves from low to high noise periodically during the work day.
MAINTENANCE
Clean the outside of the headset regularly with soap and warm water.
Note: Do not immerse in fluids.
If the headset is exposed to internal moisture, remove the hygiene kit and let the unit dry out.
6
PowerCom and LiteCom headsets) if the (0) or (+) (-) keys are not activated