Operation - Klarstein DR. BEEF PRO Manual Del Usuario

EN
24

OPERATION

1. Remove any packaging material that may be present.
2. Mount the device as described.
3. Clean the large grating (5), the small grating (1) and the collecting tray (16) with a
damp cloth.
4. Fill the drip tray (16) with fresh water up to the MAX mark.
Note: Always fill the drip tray (16) with water before use to prevent the formation
of flames by fat from food. During the first use, an odour may be created by the
materials used in the appliance. The smell is normal and disappears after a short time.
5. Set the thermostat to the desired level: choose a low or medium temperature for
heating or slow grilling, choose MAX for fast cooking and grilling. The control lamp
(14) switches off as soon as the desired temperature is reached.
6. Place the food directly on the large grid (5). Never use plates, trays or aluminium
foil under the food. The grilling time depends on the thickness of the food. Turn the
food from time to time.
Note: The height of the grill can be adjusted in three steps.
7. After use, please turn the thermostat to „0" and unplug the appliance.
Note on the heating element
The heating element is equipped with a safety switch. This prevents the heating element
from running outside the grill. If the heater does not turn on, check the connection and
that the heater is correctly mounted in the housing.