Leica NA320 Manual De Uso página 13

4
4.1
Transport in the
field
Transport in a road
vehicle
Shipping
Field adjustment
4.2
Product
Field adjustment
4.3
Product and acces-
sories
Damp products
NA320/24/32, Care and Transport
Care and Transport
Transport
When transporting the equipment in the field, always make sure that you
• either carry the product in its original transport container,
• or carry the tripod with its legs splayed across your shoulder, keeping the attached
product upright.
Never carry the product loose in a road vehicle, as it can be affected by shock and
vibration. Always carry the product in its transport container, original packaging or
equivalent and secure it.
When transporting the product by rail, air or sea, always use the complete original
Leica Geosystems packaging, transport container and cardboard box, or its equivalent,
to protect against shock and vibration.
Periodically carry out test measurements and perform the field adjustments indicated
in the User Manual, particularly after the product has been dropped, stored for long
periods or transported.
Storage
Respect the temperature limits when storing the equipment, particularly in summer if
the equipment is inside a vehicle. Refer to "5 Technical Data" for information about
temperature limits.
After long periods of storage inspect the field adjustment parameters given in this
user manual before using the product.
Cleaning and Drying
• Blow dust off lenses.
• Never touch the glass with your fingers.
• Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten the cloth
with water or pure alcohol. Do not use other liquids; these can attack the polymer
components.
Dry the product, the transport container, the foam inserts and the accessories at a
temperature not greater than +40°C/+104°F and clean them. Do not repack until
everything is dry. Always close the transport container when using in the field.
en
11