Technical Data - EINHELL BMS 800 Quick Manual Del Usuario

Anleitung BMS 800 Quick
Scope of delivery
package
BMS 800 Quick,
Quick-change drill chuck
1.5 -13 mm,
Additional grip with bit stop
Description
1 Quick-change drill chuck
2 Drill bit stop
3 Additional grip
4 2-speed - gear switch
5 Drilling/hammer drilling -
switch-over
6 Type plate
7 Clockwise, anti-clockwise
rotation - switch-over
8 Speed - control
9 Lock button
10 Operating switch

Technical Data

Voltage 230 V
Power 800 Watt
input:
Drilling Concrete 16 mm
capacity: Steel 13 mm
Wood 25 mm
Load 1st gear 0-630 min
speed: 2nd gear 0-1700 min
Number of 1st gear 0-11970 min
blows: 2nd gear 0-3230 min
Totally insulated
Interference suppressed
Constructed according to appro-
priate VDE (Verband deutscher
Elektriker = Association of
German Architects) norms
6
06.11.2001 8:50 Uhr
Caution
G The BMS 800 is not designed
for the operating of auxiliary
devices.
G Do not use near steams or
inflammable liquids.
G Only use sharp bits and suita-
ble screwing bits.
G Remove the plug from the
socket for all adjusting and
cleaning work.
G Protect the mains cable
against any damage. Oil and
acids can damage the cable.
G Do not carry the device by the
mains cable.
G Do not remove the plug from
the socket by pulling the mains
cable.
G Make sure before inserting the
plug that the operating switch
is not locked.
G When using a cable drum
uncoil the cable completely.
Cross-section of wire at least
1 mm 2 .
G Do not overload machine.
G Secure all workpieces to be
processed sufficiently.
G Do not allow children to have
access.
G Make sure you have a secure
stance on ladders or scaffold-
ing when using the drill free-
hand.
G Use the additional grip when
1
boring near electric cables.
1
G Localise lines with a line detec-
1 tor in walls where power, water
1
or gas lines are laid invisibly.
G Wear protection goggles and
use a dust mask for dust-pro-
ducing work.
Seite 6
Maintenance
G Always keep the drill clean.
G Do not use corroding agents
for cleaning plastic.
G Check carbon brushes in the
case of excessive sparking.
G Keep ventilation channels free.
G If you discover any damage,
you can define spare parts
precisely on account of the
exploded view drawing and
parts list and place your
request with our customer
service.
G Always arrange for a specialist
to carry out repairs.