Yamaha WaveRunner FX140 Manual De Montaje página 48

2. Adjust:
• Trolling speed
Adjustment steps:
• Remove the air filter case cover 1.
• Start the engine.
• Turn the throttle stop screw 2 in or out
until the specified speed is obtained.
Turn in a
Turn out b
• Install the air filter case cover.
Air filter case cover screw:
2.5 N • m (0.25 kgf • m, 1.8 ft • lb)
LOCTITE
STEERING CABLE
1. Check:
• Jet thrust nozzle clearance a, b
Difference → Adjust.
Checking steps:
• Set the control grip in the neutral position.
• Turn the handlebar lock to lock.
• Measure the clearances a and b.
• If a and b clearances are not even,
adjust the cable joint.
– 18 –
Increase trolling speed.
Decrease trolling speed.
®
572
E