geberit ECO 202 Instrucciones De Servicio página 23

Operation
Inserting the Geberit pressing jaw or Geberit adapter jaw
Prerequisites
Pressing tool is de-energised.
WARNING
Danger of crushing by exposed parts
Do not hold any parts of your body or other objects in between the pressing jaws
Keep your fingers away from the roller range if there is no pressing jaw inserted
CAUTION
Damage to the device because the retaining pin is not pushed in completely
Push the retaining pin in completely
1
Remove the retaining pin (see cover page in the front, figure A).
2
Insert the pressing jaw or adapter jaw in the pressing tool (see cover page in the front,
figure B).
3
Push the retaining pin in until the stop position is reached (see cover page in the front,
figure C).
B972-003 © 06-2015
965.597.00.0 (02)
EN
23