Program The Remote Transmitter - SportDOG SportTrainer SD-1225E Manual De Funcionamiento

PROGRAM THE REMOTE TRANSMITTER

NOTE: The Remote Transmitter is factory set to mode 1. The mode of the Remote Transmitter can be
changed to fi t your type or style of training.
TO CHANGE THE MODE:
1. Referring to the following table, adjust the Intensity
Dial to the mode you want to use.
2. Turn the Remote Transmitter over and remove the belt
clip (if attached).
3. Using a straight pen or the tine on the buckle of your
collar strap, depress and release the mode button.
When the mode button is pressed, the Transmitter
Indicator Light will be solid in colour. When it is
released, it will fl ash the mode selected.
For example, if mode 5 is desired, adjust the Intensity Dial to Level 5. Once the mode button has been
depressed, the Transmitter Indicator Light will be solid, and once the mode button is released, the
Transmitter Indicator Light will fl ash 5 times.
MODE UPPER BUTTON
FUNCTION
1
Continuous stimulation
(Level set by intensity dial)
2
Continuous stimulation
(Level set by intensity dial)
3
Continuous stimulation
(Level set by intensity dial)
4
Momentary stimulation
(Level set by intensity dial)
5
Continuous stimulation
(Level set by intensity dial)
6
Continuous stimulation
(Level set by intensity dial)
7
Dog 1 - Continuous
stimulation (Level set by
intensity dial)
LOWER BUTTON
FUNCTION
Momentary stimulation
(Level set by intensity dial)
Momentary stimulation
(Level set by intensity dial)
Tone only
Tone only
Momentary stimulation
(Level set by intensity
dial)
Low continuous stimulation
(Level set by intensity dial)
Dog 2 - Continuous
stimulation (Level set by
intensity dial)
WWW.SPORTDOG.COM
SIDE BUTTON NUMBER
FUNCTION OF DOGS
Tone only 1
Vibration only 1
Vibration only 1
Vibration only 1
+2 Boost † 1
Programmable 1
Continuous
Stimulation*
Dog 3 - Continuous 3
stimulation (Level
set by intensity dial)
11