Kit Assembly - Metra 95-3023HG Instrucciones De Instalación

1. Secure the radio brackets to the radio
using the screws supplied with the
radio. (Figure A)
2. Secure the radio assembly to the radio
housing using the (4) #8 x 3/8" Phillips
screws provided. (Figure B)
3. Attach the plastic trim piece removed in
dash disassembly to the top of the
radio housing.
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from Metra
and/or Axxess. Test the radio for proper
operation.

KIT ASSEMBLY

(Figure A)
5. Secure the completed radio assembly,
and the a/c vents, to the dash using the
factory screws.
a. Slide the radio assembly into
the dash.
b. Wiggle the a/c vents in.
c. Secure the now complete assembly
to the dash using the (6) factory
9/32" screws.
6. Reassemble the dash in reverse
order of disassembly to complete the
installation, using the 95-3023HG radio
trim panel.
(Figure B)
REV. 7/14/2021 INST95-3023HG
3