Sony XR-C8100R Manual De Instrucciones página 24

5
When you finish entering tracks, press
(4) (PLAY MODE) for two seconds.
6
Press (SHIFT).
Notes
• "**Wait**" appears in the display while the unit
is reading the data, or when a disc has not been
put into the unit.
• "*Mem Full*" appears in the display when you
try to enter more than 12 tracks into a
programme.
Playing the stored programme
Changing the disc order in the unit will not
affect programme memory play.
You can select:
•PGM 1 to play Programme 1.
•PGM 2 to play Programme 2.
•PGM 1+2 to play Programmes 1 and 2.
1
Press (SHIFT).
EN
2
Press (4) (PLAY MODE) repeatedly until
"PGM" appears.
3
Press (5) (n ) repeatedly until the
desired programme appears.
Programme 1 playback
PLAY MODE
Programme 2 playback
PLAY MODE
Programmes 1 and 2 playback
PLAY MODE
Normal playback
PLAY MODE
Programme Play starts.
4
Press (SHIFT).
To go back to normal playback mode, select
24
"PGM off" in step 3 above.
PGM 1
µ
PGM 2
µ
PGM 1+2
µ
Notes
• If you press a number button during programme
memory play, programme memory play is
interrupted, and playback of the selected disc
starts.
• "NO Data" appears in the display if no track is
stored in the programme.
• If a track stored into the programme memory is
not in the disc magazine, the track will be
skipped.
• When the disc magazine contains no tracks
stored into the programme memory, or when
the programme information has not been loaded
yet, "Not ready" appears.
Erasing an entire programme
1
Press (SHIFT), then press (4) (PLAY
MODE) for two seconds.
DISC TRACK
PLAY MODE ENTER
"P 1" shows Programme 1 is selected.
If you have labelled the disc, the bank edit
mode appears. Press (4) (PLAY MODE) to
display "P 1" above.
2
Press (2) (N ) repeatedly until "DEL"
appears.
PLAY MODE ENTER
To erase Programme 2, press (5) (n )
repeatedly until "PGM 2" appears.
3
Press (6) (ENTER) for two seconds.
PLAY MODE ENTER
The entire programme is erased.
4
When you finish erasing programmes,
press (4) (PLAY MODE) for two seconds.
5
Press (SHIFT).