Labeling A Cd; Disc Memo - Sony XR-C8100R Manual De Instrucciones

Labeling a CD

(CD unit with the custom file function)
You can label each disc with a personalized
name. You can enter up to eight characters for
a disc. If you label a CD, you can locate the
disc by name (page 27) and select the specific
tracks for playback (page 28).
1
Play the CD and press (PTY/LIST) for two
seconds.
DISC
2
Enter the characters.
1 Rotate the dial clockwise to select the
desired characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
EN
DISC
If you rotate the dial counterclockwise,
the characters appear in the reverse
order.
If you want to put a blank space
between characters, select "_" (under-
bar).
2 Press (5) (n ) after locating the
desired character.
The flashing cursor moves to the next
space.
DISC
If you press (2) (N ), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3
To return to normal CD playback mode,
press (PTY/LIST) for two seconds.
Tip
To erase/correct a name enter "_" (under-bar) for
each character.
26

— Disc Memo

Displaying the disc memo name
Press (DSPL) during CD or CD TEXT disc
playback.
DISC
Each time you press (DSPL) during CD or
CD TEXT disc playback, the item changes
as follows:
Elapsed playback time
Disc memo name
Track name*
Clock
MOTION DISPLAY*
1 If you connect an optional CD unit with the
*
CD TEXT function, the CD TEXT information
will appear in the display when you playback
a CD TEXT disc.
2 All the items above are scrolled in the
*
display one by one in order.
$
$
$
1
$
$
2