Wireless Functionality - Siemens HS Manual Del Usuario

Programmable features section circled

Wireless Functionality

Your hearing instrument may be equipped with wireless functionality.
This provides synchronization between two hearing instruments. If
you change the program or volume on one instrument, the other is
automatically changed. In addition, wireless technology automatically
adjusts the system to change both hearing instruments simultaneously
to adapt to different listening situations. The wireless functionality also
enables use of an optional remote control.
Note: The performance of the e2e wireless® could be temporarily
affected when in close proximity to electromagnetic noise sources,
such as a computer monitor or television. Move away from the
noise source if you experience difficulty.
Technical information for e2e wireless function:
Operating frequencies: flow = 115 kHz, fhigh = 120 kHz; Rated H-field
strengh (maximum): –11,5 dB µA/m at 3 meters.
This Category II radiocommunication device complies with Part 15
of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause interference,and (2) this device must
accept any interference, including interference that may cause undesired
operation of the device.
This Class B digital apparatus II radiocommunication device complies
with Part 15 of FCC Rule. Operation is subject to the following two
conditions: (1) this device may not cause interference,and (2) this device
IN-THE-EAR
Use the FEATURE
type of
CARD
battery
shown
below
Program button
Microphone
Microphone
Battery
compartment door
Volume control
Vent
OPTIONAL FEATURES PROGRAMMABLE
FEATURES
Volume control
Learning volume preference e2e wireless ®
Program button Push button on/off
Directional microphone Power on delay
Low battery indicator
Telecoil
AutoPhone Volume control
®
alert tones
ePocket ® remote control
Program change
alert tones
PROGRAMS
Program number Listening environment
1
2
3
4
Refer to the ITE User Manual for information on
Optional Features and Programmable Features.
Fig. 11: FEATURE CARD
Programmable
Features
19