Changing The Program - Siemens HS Manual Del Usuario

Changing the program

Your Siemens hearing instrument may have up to 5 memories, also
called hearing programs. Each program is different and designed to help
you hear better in specific listening situations. The four programs are
selected with the program button of your hearing instrument (Fig. 9).
When initially turned on (after the battery compartment door is closed),
the microphone is ON and ready for general use. The default is Program
1. Your Audiologist or Hearing Care Provider will provide you with the
number of programs most appropriate for your needs. Each time you
press the program button on the instrument, the instrument changes to
the next program. The program change may be confirmed by alerting
tones or beeps that correlate to the program you are in. That means if
you select Program 3, then the hearing instrument beeps 3 times.
Your Audiologist or Hearing Care Provider may list your personal
programs on the feature card (Fig. 10).
Programs
Fig. 10: FEATURE CARD, Personal program section circled
The optional remote control can also be used to change the program.
16
Program
button
Fig. 9: Changing the program
IN-THE-EAR
Use the
type of
battery
shown
below
Program button
Microphone
Battery
compartment door
Volume control
Vent
OPTIONAL FEATURES PROGRAMMABLE
FEATURES
Volume control
Learning volume preference
Program button
Directional microphone
Telecoil
AutoPhone ®
ePocket ® remote control
PROGRAMS
Program number Listening environment
1
2
3
4
Refer to the ITE User Manual for information on
Optional Features and Programmable Features.
FEATURE
CARD
Microphone
e2e wireless
®
Push button on/off
Power on delay
Low battery indicator
Volume control
alert tones
Program change
alert tones