Operation - Kärcher BR 40/25 C Bp Manual Del Usuario

Operation

ATTENTION
Risk of damage. Raise the suction bar be-
fore reversing.
Note:
To put the brush drive out of operation im-
mediately release the control handle.
Filling in detergents
ATTENTION
Risk of damage. Only use the recommended
detergents. For other detergents the operator
bears the increased risk regarding the opera-
tional safety and risk of accidents. Only use
detergents that are free from solvents, hydro-
chloric acid and hydrofluoric acid.
Follow the safety instructions for using de-
tergents.
Note:
Do not use highly foaming detergents.
Recommended detergents:
Application
Routine cleaning of all water
resistant floors
Routine cleaning of glossy
surfaces (e.g. granite)
Routine cleaning and basic
cleaning of industrial floors
Routine cleaning and basic
cleaning of fine stoneware tiles
Routine cleaning of tiles in
sanitary areas
Cleaning and disinfection in
sanitary areas
Removal of coating from all al-
kali-resistant floors (e.g. PVC)
Removal of coating from li-
noleum floors
 Open the cover of the fresh water reser-
voir.
 Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liq-
uid 60°C.
 Close the cover of the fresh water res-
ervoir.
Detergent
RM 745
RM 746
RM 755 es
RM 69 ASF
RM 753
RM 751
RM 732
RM 752
RM 754
– 7
EN
Driving to the Place of Use
When the running gear is turned to the front
the appliance can be pushed to the place of
use without any contact of the brushes with
the floor.
 Raise the vacuum bar.
 Press the appliance to the bottom using
the push handle.
 Turn the running gear to the front with
your foot.
 Use the pushing handle to push the ap-
pliance to the place of use.
Cleaning Programs
3
2
1
1 OFF
Appliance is out of operation.
2 Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3 Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
4 Vacuuming
Suck in the dirt fleet.
5 Polishing
Polishing the floor without the applica-
tion of liquid.
Battery control display
The battery control display shows the
charging status of the batteries when the
charger has been connected:
40-100% glows green
20-40% glows yellow
0-20% slowly blinks red
empty glows red
4
5
23