5.4 ROGRAMMING MENUS
CAUTION!
The navigation between the different menus can be executed through the Menu and Esc keys.
Use the keys
If no key is pressed for 30s, the screen returns to the start menu (current measurement).
5.4.1 Menus
5.4.2 LCD screen
Segment
1
Currents and times Identification.
2
Currents and times value.
3
Measure unit.
The battery charge.
4
The LED flashes at intervals of 2~3s in the case of the internal 3.6 V lithium battery being discharged (below 2.5 V).
5
Communication in network.
Bar chart.
6
It shows the proportion of currents of each phase related to Ir.
Inverted triangles indicate which phase is being shown in segment 2.
When the unit is energized for the first time, all the segments are shown for approximately 1s.
After this period, it returns to the measurement screen.
and
to navigate between the submenus.
Figure 5.3: Menus
Figure 5.4: LCD Screen
Information
Table 5.2:
www.weg.net
ABW - Air Circuit Breaker | 43