Other Functions - WEG ABW Serie Manual De Instrucciones

www.weg.net

5.4.6 Other Functions

Menu
Address
Comunication
Speed
Clock
Event
46 | ABW - Air Circuit Breaker
Tecla
M
Upon pressing (2x) the key M from the measurement screen, the screen of configuration
2
of communication in network (address) is accessed. The address can be selected 1 thru
247.
Upon pressing the key Enter, the adjustment is saved, or, upon pressing the key Esc/
Reset, one returns to the measurement screen without saving it. Once saved, the word
"SAVE" is shown on the screen.
M
Upon pressing (3x) the key M from the measurement screen, the screen of configuration
3
of communication in network (Baud rate) is accessed. The Baud rate can be selected
between 38,400, 19,200 and 9,600.
Upon pressing the key Enter, the adjustment is saved, or, upon pressing the key Esc/
Reset, one returns to the measurement screen without saving it.
Once saved, the word "SAVE" is shown on the screen.
Upon pressing (4x) the key M from the measurement screen, the screen of checking
M
of clock is accessed.
4
The clock is shown in the modality 24h, and the point between hour and minute
flashes every second.
Upon pressing (5x) the key M from the measurement screen, the screen of checking
M of events recorded is accessed. The last 10 events are recorded.
5
The information recorded is: current of shortage, type of shortage, phase of
occurrence, time and date of shortage.
Example:
Ii: Type of shortage. 1,600 A: current of shortage.
If there are no events recorded, the screen at the side will be displayed.
Tabla 5.5:
Contenido
: phase of shortage.