Disassembly And Disposal; Maintenance - SICK CQF16 Instrucciones De Uso

9

Disassembly and disposal

10

Maintenance

8022710.1F6T/2022-03-16 | SICK
Subject to change without notice
The sensor must be disposed of in line with applicable country-specific regulations.
When disposing of them, you should try to recycle them (especially the precious met‐
als).
NOTE
Disposal of batteries, electric and electronic devices
• According to international directives, batteries, accumulators and electrical or
electronic devices must not be disposed of in general waste.
• The owner is obliged by law to return this devices at the end of their life to the
respective public collection points.
•
WEEE: This symbol on the product, its package or in this document,
indicates that a product is subject to these regulations.
SICK sensors are maintenance-free.
Contamination can be removed with cleaning agents (Topaz AC3, AC1, MD3, CL1,
Topactive OKTO, P3-hypochloran).
We recommend that you check the threaded assemblies and plug connectors at regular
intervals.
No modifications may be made to devices.
If there is a defect, the sensor must be replaced and the defective sensor protected
from unauthorized use.
Subject to change without notice. Specified product properties and technical data are
not written guarantees.
DISASSEMBLY AND DISPOSAL
O P E R A T I N G I N S T R U C T I O N S | CQF16
9
en
21