ATTENTION
Risk of damage! Always switch the switch-
ing stages quickly in order to prevent dam-
age of the drive motor.
Start suction process.
Cleaning the dust filter
Note: In order to avoid a loss of suction
power, clean the filter at regular intervals.
Illustration
Repeatedly move the handle for filter
cleaning back and forth.
Empty the collection container
Illustration
Switch off the appliance and remove
the plug from the socket.
Shake off dust filter.
Lower the collection container using the
lever
Empty collection container into disposal
unit.
Dispose of the contents according to
the local provisions.
Note: Move the collection container on the
rollers, not by means of a forklift or crane.
Removing the suction head
Illustration
Switch off the appliance and remove
the plug from the socket.
Open the lock of the suction head.
Remove the suction head and put
aside.
Shutting down
Switch off the appliance using the On/
Off switch.
Empty and clean the collection contain-
er.
Dismantle the accessory and rinse it
with water and let dry if necessary.
Transport
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.
Care and maintenance
Rinse the appliance and the accesso-
ries with fresh water at regular intervals
and let them dry.
Check the pocket filter for damage at
regular intervals. Replace filter in case
of damage.
Replacing the pocket filter
1 Screws
2 Tensioning ring
3 Pocket filter
4 Cleaning device
Remove the suction head and put
aside.
EN
– 3
Storage
11