Silverline 125983 Manual Del Usuario página 8

125983
Maintenance
WARNING: Always ensure that the machine is disconnected from the mains power
supply before performing any maintenance procedure.
Lubrication
• The guide roller should be occasionally lubricated with a few drops of machine
oil.
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause the machine's
internal parts to wear quickly, and shorten service life.
• Clean the body of your machine with a soft brush, or dry cloth. If available, use
clean, and dry compressed air to blow through the ventilation holes.
This Silverline product comes with a 3 year
guarantee.
To qualify you must register this product at silverlinetools.com within
30 days of purchase. The guarantee period begins on the date of
purchase as detailed on your sales receipt.
Should you NOT wish to register this Silverline product a standard 1
year guarantee will apply.
This Guarantee and guarantee period becomes effective at the date
of retail purchase as detailed on your sales receipt.
PLEASE KEEP YOUR SALES RECIEPT
If this product develops a fault within 30 days of purchase, return it to
the stockist where it was purchased, with your receipt, stating details
of the fault. You will receive a replacement or refund.
If this product develops a fault after the 30 day period, return it to:
Silverline Tools Service Centre
PO Box 2988
Yeovil
BA21 1WU, UK
The guarantee claim must be submitted during the guarantee period.
You must provide the original sales receipt indicating the purchase
date, your name, address and place of purchase before any work
can be carried out.
You must provide precise details of the fault requiring correction.
All claims will be verified by Silverline Tools that the deficiencies are
of a material or manufacturing fault within the guarantee period.
We do not refund carriage. All products should be in a suitably clean
and safe state for repair, and should be packaged carefully to prevent
damage or injury during transportation. We may reject unsuitable or
unsafe deliveries.
All work will be carried out by Silverline Tools or its authorised repair
agents.
The repair or replacement of the product will not extend the period
of guarantee.
Defects recognised by us as being covered by the guarantee shall
be corrected by means of repair of the tool free of charge (excluding
carriage charges) or by replacement with a tool in perfect
working order.
Retained tools, or parts, for which a replacement has been issued,
will become the property of Silverline Tools.
Silverline Tools Guarantee
Terms & Conditions
www.silverlinetools.com
800W Laser Jigsaw
Brushes
• Over time the carbon brushes inside the motor may become worn. Excessively
worn brushes may cause; loss of power, intermittent failure, or visible sparking.
• If you suspect that the brushes may be worn, have them replaced at an
authorised service centre.
Disposal
• Do not dispose of power tools, or other waste electrical and electronic
equipment, with household waste.
• Contact your local waste disposal authority for information on the proper way
to dispose of tools.
Registering your purchase
Registration is made at silverlinetools.com by selecting the Guarantee
Registration button. You will need to enter:-
• Your personal details
• Details of the product and purchase information
Once this information is entered your guarantee certificate will
be created in PDF format for you to print out and keep with your
purchase.
The repair or replacement of your product under guarantee provides
benefits which are additional to and do not affect your statutory
rights as a consumer.
What is covered:
The repair of the product, if it can be verified to the satisfaction of the
Silverline Tools that the deficiencies were due to faulty materials or
workmanship within the guarantee period of purchase.
If any part is no longer available or out of manufacture, Silverline
Tools will replace it with a functional replacement part.
Use of the product in the EU.
What is not covered:
Silverline Tools does not guarantee repairs required as a result of:
Normal wear and tear caused by use in accordance with the
operating instructions eg blades, brushes, belts, bulbs, batteries etc.
The replacement of any provided accessories drill bits, blades,
sanding sheets, cutting discs and other related items.
Accidental damage, faults caused by negligent use or care, misuse,
neglect, careless operation or handling of the product.
Use of the product for anything other than normal
domestic purposes.
Change or modification of the product in any way.
Use of parts and accessories which are not Silverline Tools
genuine components.
Faulty installation (except installed by Silverline Tools).
Repairs or alterations carried out by parties other than Silverline Tools
or its authorised repair agents.
Claims other than the right to correction of faults on the tool named
in these guarantee conditions are not covered by the guarantee.
7