Explanation Of Symbols; General Safety - Silverline 125983 Manual Del Usuario

GB

Explanation of Symbols

• Wear breathing protection
• Wear eye protection
• Wear hearing protection
• Wear gloves
• Do not dispose of WEEE (Waste Electrical
and Electronic Equipment) as unsorted waste
• Class II construction (Double insulated)
Specification
Voltage .................................................230V
Frequency ............................................50Hz
Power ...................................................800W
No load speed ......................................800-3000SPM
Blade type ............................................Bayonet
Max cutting thickness:
Wood ..................................80mm
Steel ...................................8mm
Aluminium ..........................12mm
Weighted vibration ...............................11.387m/s²
Sound pressure ....................................88dB(A)
Sound power ........................................99dB(A)
Double insulated ..................................
As part of our ongoing product development, specifications
of Silverline products may alter without notice.
Declaration of Conformity
Product number:
Description:
Silverline Tools Ltd declares that the above product conforms
to the following directive(s):
2006/95/EC, 2004/108/EC, 98/37/EC
With reference to:
EN55014-1:2006, EN61000-3-2:2006,
EN61000-3-3:1995+A1+A2, EN55014-2:1997+A1
EN60745-1:2006, EN60745-2-11:2003+A11
EN60825-1:1994+A1+A2
Philip Ellis
Director
Silverline Tools Limited
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, UK
4
125983
800W Laser Jigsaw
SS 800-LJ

General Safety

Carefully read and understand this manual and any label attached to the tool
before use. Keep these instructions with the product for future reference. Ensure
all persons wh o use this product are fully acquainted with this manual.
Even when used as prescribed it is not possible to eliminate all residual risk
factors. Use with caution. If you are at all unsure of the correct and safe manner in
which to use this tool, do not attempt to use it.
Keep guards in position
• Always keep guards in position, in good working order, correctly adjusted and
aligned. Never attempt to use a tool if any of the supplied guards are missing. If
any guards are damaged, replace before use.
Remove adjusting keys
• Always check to see that keys and adjusting devices are removed from the
tool before use.
Clean the work area
• Accidents can occur where benches and work areas are cluttered or dirty,
floors must be kept clear, avoid working where the floor is slippery. If working
outdoors, make yourself aware of all potential slip and trip hazards before
using this tool.
Children and pets
• Children and pets should always be kept at a safe distance from your work
area. Lock tools away where children can't get access to them. Do not allow
children, or untrained persons to use this tool.
Use the correct tool
• Don't force, or attempt to use a tool for a purpose it was not designed.
• This tool is not intended for industrial use.
Wear suitable clothing and footwear
• Don't wear loose fitting clothing, neckties, jewellery, or other items which may
become caught. Wear non slip footwear, or footwear with protective toe caps
where appropriate. Long hair should be covered or tied back.
Keep your balance
• Don't over reach, keep proper footing at all times, do not use tools when
standing on an unstable surface.
Accessories
• The use of any attachment or accessory other than those mentioned in this
manual could result in damage or injury. The use of improper accessories could
be dangerous, and may invalidate your warranty.
Secure work
• Where possible, always secure work. If appropriate use a clamp or vice, it will
allow you to use both hands to operate your tool.
Check for damaged or missing parts
• Before each use, check if any part of the tool is damaged or missing, check
carefully that it will operate properly and perform its intended function. Check
alignment of moving parts for binding. Any guard or other part that is damaged
should be immediately repaired or replaced by an authorised service centre.
DO NOT USE IF DEFECTIVE.