Cleaning; Troubleshooting; Problems And Solutions - Imetec ZEROCALC Instrucciones Para El Uso

CLEANING

WARNING!
Before cleaning the iron in any way, make sure that the appliance plug (13) is not connected
to the socket and that the plate has cooled completely.
Any deposits, starch residue or size left on the plate can be removed using a damp cloth and a non-abrasive
liquid detergent.
Avoid scratching the plate with steel wool or metallic objects.
The plastic parts can be cleaned with a damp cloth then wiped over with a dry cloth.

PROBLEMS AND SOLUTIONS

The most common problems related to appliance use will be discussed in this chapter. If you are not able to
solve the problems with the following information, please contact the Authorised Service Centre.
Problem
The plate stays cold or
does not heat up.
The plate temperature
control light turns
on and off.
Only small quantities
of steam or none at all
come out.
Impurities coming out
of the steam vents stain
garments.
(continues)
Possible causes
There is no power.
Normal procedure.
The steam selector is on the Ø
position.
There isn't enough water in the
tank.
The Anti-Drip function is
activated.
Possible residue in the steam/
plate chamber.
You are using chemical
additives, scented substances
or descalers.
You are using pure distilled or
softened water.
You are using starch
Solution
Check that the plug is correctly inserted
or try to insert it in another socket.
Make sure that the temperature control
knob (2) is not set on the minimum
temperature Ø (Fig D).
The turning on and off of the light indicates
the iron is in the heating phase.
As soon as it reaches the set temperature,
the light switches off.
Move the steam indicator to the desired area
(fig B).
Fill the tank.
Wait until the plate has reached the correct
temperature again.
Carry out self-cleaning (see paragraph Self
Clean/Calc Clean)
Using such substances can damage the
product: do not add additives to the water in
the tank.
Mix tap water (50%) with distilled and/or
demineralised (50%);
Always spray starch on the wrong side of
fabrics.
GB
13