Disposal; Service And Warranty - Imetec ZEROCALC Instrucciones Para El Uso

GB
Problem
Water comes out of the
plate.

DISPOSAL

The product packaging consists of recyclable materials. Dispose of these in an environmentally
appropriate manner.
In accordance with EU directive 2002/96/EC, the appliance must be disposed of properly at the end of
its service life. This involves the recycling of valuable substances contained within the appliance and
reduces the impact on the environment. For more information, contact your local disposal company or
the store where you purchased the appliance.

SERVICE AND WARRANTY

For further information on repairs or new spare parts, please contact an authorised IMETEC service centre
using the free phone number below or by visiting our website. A manufacturer warranty is provided for the
appliance. Details can be found on the enclosed warranty sheet.
Failure to comply with the use and maintenance instructions provided in this user manual will invalidate all and
any rights to the manufacturer's warranty.
Tenacta Group S.p.A. Via Piemonte 5/11 24052 Azzano S. Paolo (BG) ITALY
14
Possible causes
Plate temperature is too low due
to too frequent use of the Super-
steam button.
The temperature control knob
(2) is set on the minimum
temperature Ø (Fig D).
www. imetec.it
Tel. +39.035.688.111 Fax +39.035.320.149
Solution
Slightly increase the time between jets of
steam.
Move the temperature control knob (2) to
a higher temperature.