Midea ESK 2875 BL Manual De Usuario página 196

• Press " " button to select the minute minder function. The relevant "
symbol will ash.
• Use " + " " - " button to adjust minute minder. (Refer to the instructions for
setting the correct time of day.) Press "
begins to light continuously, the audible warning time adjustment is done.
• When the time is up, the timer gives an audible warning and the "
begins to ash on the screen. pressing any key for 3 seconds, it will stop the
audible warning and the "
warning time adjustment is for warning purposes only. Press "
together for more than 3 seconds to enter standby mode if oven will not be
used.
6. Semi-automatic programming according to cooking period
This function is used to cook in the desired time range, The food to be cooked
are put into the oven. The oven is adjustment to the desired cooking function and
temperature degree.
The maximum setting of cooking period is 10 hour.
• Press " " button until you see " Dur " on the timer screen. (Before setting
cooking period.)
• Use " + " " - " button to adjust cooking period for the food you wish to cook.
(Refer to the instructions for setting the correct time of day.) press "
to con rm, the day's time will appear on the screen and the symbols " A " "
" will light on the screen. While doing this, the oven will also start to operate.
• At the completion of the set duration, the timer will stop the oven and give an
audible warning. Also, the symbol " A " will begin to ash on the screen. After
bringing the cooking function and oven temperature knob to " 0 " position.
Pressing any button less than 3 second, it will stop the audible warning.
Pressing " " for more than 3 seconds set the oven to Manual mode again to
use the oven.
7. Semi-automatic programming according to finishing time
This function is used to cook according to the desired nishing time. The food
to be cooked is put into the oven. The oven is adjusted to the desired cooking
function and temperature degree.
• Press " " button until you see " End " on the timer screen. (Before setting
nished time).
• Use " + " " - " button to adjust nishing time. (Refer to the instructions for
setting the correct time of day.)
• Press " " button to con rm , the day's time will appear on the screen and the
symbols " A " "
start to operate.
• At the completion of the set duration, the timer will stop the oven and give an
audible warning. Also, the symbol " A " will begin to ash on the screen. After
bringing the cooking function and oven temperature knob to " 0 " position.
pressing any button less than 3 second, it will stop the audible warning.
Pressing " " for more than 3 seconds set the oven to Manual mode again to
use the oven.
8. Full-automatic programming
• This function is used to cook after a certain period of time, with a certain
duration. The food to be cooked is put into the oven. The oven is adjusted to
the desired cooking function. The oven temperature is adjusted to the desired
 EN-25 
" symbol disappears on the screen. Audible
"will light on the screen. While doing this, the oven will also
" button to con rm, the "
" " ."
" symbol
" symbol
" and " + "
" button