Kärcher BR 40/25 C Ep Manual Del Usuario página 19

 Fill in the water detergent mixture up to
the MAX marking of the filling level dis-
play. Maximum temperature of the liq-
uid 60°C.
 Close the cover of the fresh water res-
ervoir.
Driving to the place of use
When the running gear is turned to the
front, the appliance can be pushed to the
place of use without the brushes touching
the floor.
 Raise the vacuum bar.
 Press the appliance down using the
push handle.
 Turn the running gear to the front with
your foot.
 Use the push handle to push the appli-
ance to the place of use.
Cleaning Programs
2
1
1 OFF
Appliance is out of operation.
2 Scrubbing suction
Wet clean the floor and vacuum up dirt
water.
3 Wet scrubbing
Wet clean the floor and allow the deter-
gent to react.
4 Vacuuming
Suck in the dirt fleet.
5 Polishing
Polishing the floor without the applica-
tion of liquid.
18
3
4
5
Setting the Vacuum Bar
Oblique position
To improve the vacuuming result on tiled
floors the vacuum bar can be turned to an
oblique position of up to 5°.
 Release the wing nuts.
 Turn the vacuum bar.
 Tighten the wing nuts.
Inclination
If the vacuum result is unsatisfactory the in-
clination of the straight vacuum bar can be
modified.
 Release the wing nuts.
 Tilt the vacuum bar.
 Tighten the wing nuts.
EN
– 5