Hauck PROsafe 35 Instrucciones De Manejo página 37

All manuals and user guides at all-guides.com
EN
BASE INSTALLATION WITH VEHICLE SEAT BELT
STEP 4: Open the vehicle belt lock off by rotating
the lower lock off lever down (1), rotate the upper
lock of lever up into the open position (2), lift the
back of the base and push out on the upper lock
off lever to unlock the recline adjustment foot (3),
and allow the recline adjustment foot to move
down into the extended position (4).
3
2
1
4
STEP 5: Release the upper Lock Off Lever to
lock the Recline Adjustment Foot in place and
set the base down onto the vehicle seat.
STEP 6: Check that the red recline indicator is
aligned with the recline position for your child's
weight and adjust if necessary.
Proper seat recline is achieved when the red
indicator inside the recline indicator is aligned
with the green line identified as "22 lbs (10 kg)
or less" or "Over 22 lbs (10 kg)" that applies
based on your infant's weight.
EN 37