Hauck PROsafe 35 Instrucciones De Manejo página 56

All manuals and user guides at all-guides.com
EN
CARRIER INSTALLATION WITHOUT BASE
STEP 3: Tighten the vehicle lap belt around the
carrier by pushing down on the carrier (1) and
pulling on the free end of the lap belt (2).
2
1
STEP 4: Adjust and lock the carry handle into
the desired adjustment position.
STEP 5: Check that the carrier is securely
installed and the vehicle belt stays securely
adjusted around the carrier. Carrier should not
move more than 1 inch (25 mm) side to side at
the belt path. If the vehicle lap belt does not stay
tightly adjusted around the carrier try reinstalling
and tightening the lap belt. If the vehicle lap belt
does not stay tight and continues to loosen,
carrier must be moved to another seating
position in the vehicle.
56 EN