Hauck PROsafe 35 Instrucciones De Manejo página 53

All manuals and user guides at all-guides.com
CARRIER INSTALLATION WITHOUT BASE
If the vehicle lap belt does not stay tightly
adjusted around the carrier try reinstalling and
tightening the lap belt. If the vehicle lap belt
does not stay tight and continues to loosen, a
locking clip is required or the carrier must be
moved to another seating position in the vehicle.
See instructions in the "Installation with Locking
Clip"section below.
CHECK FOR PROPER INSTALLATION
Carrier must not move more than 1 inch side
to side at the belt path.
Vehicle belt is not twisted.
Vehicle belt is tightly adjusted and stays
tightly adjusted around carrier. Locking clip
must be used if lap belt does not stay tightly
adjusted around carrier.
Recline angle is correct. Carrier is properly
reclined when the blue Proper Seat Recline
reference line is horizontal when the vehicle
is parked on level ground. (Readjust if
necessary.)
Carry handle is locked in any of the five (5)
positions.
EN
EN 53