9/16" Flat Head Screw - Sauder Whisker Manual Del Usuario

STEP 20
å Fasten the RETAINING BARS (8) to the SLIDING
DOOR (M). Use four 9/16" PAN HEAD SCREWS (13).
NOTE: Be sure to position the RETAINING BARS
å
exactly as shown in the enlarged diagram. They
should overhang the bottom edge of the DOOR.
å Flip the SLIDING DOOR (M) over.
Fasten the LOCK (7) to the SLIDING DOOR (M) as
å
shown. Use four 9/16" FLAT HEAD SCREWS (20).
8
whiskersupport.com
M
429610

9/16" FLAT HEAD SCREW

(4 used in this step)
7
M
8
13
9/16" PAN HEAD SCREW
(4 used in this step)
20
Page 25