Starting Up The Product; Single-Head Pump - Grundfos MAGNA3 D Instrucciones De Instalación Y Operación

Ocultar thumbs Ver también para MAGNA3 D:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Starting up the product

5.1 Single-head pump

The number of starts and stops via the power
supply must not exceed four times per hour.
Do not start the pump until the system has been filled with liquid
and vented. Furthermore, the required minimum inlet pressure
must be available at the pump inlet. See section 14. Disposing of
the product.
The pump is self-venting through the system, and the system
must be vented at the highest point.
Step
Action
Switch on the power supply to the pump.
The pump has been factory set to
1
"AUTO
" mode, which starts after
ADAPT
approximately 5 seconds.
Operating panel at first startup.
2
After a few seconds, the pump display
changes to the startup guide.
The startup guide guides you through the
general settings of the pump, such as
language, date and time.
If you do not touch the buttons on the
3
operating panel for 15 minutes, the
display goes into sleep mode. When you
touch a button, the "Home" display
appears.
Illustration
1/On
0/Off
15

Publicidad

Tabla de contenido
loading

Tabla de contenido