Rinsing Of Circuits; Preparing The Grinder; Preparing Espresso And Long Coffees - Krups EA69 Serie Manual

01_IFU-KR_COFFEEMAKER_EA6910_EN_Mise en page 1 28/05/10 14:49 Page7
KRUPS
SERIE EA69xx
5

RINSING OF CIRCUITS

Turn the appliance on by
pressing the button.
The light will flash
during the pre-heating and
initialisation cycle.
!
Note : It is preferable to rinse the 2 circuits out at least once after the machine has not been used for several
days. Each time you plug your machine in, it will carry out an initialisation cycle.
6

PREPARING THE GRINDER

n You can choose the strength of your coffee by setting the coffee bean grinding fineness.
n The finer the grinding setting, the stronger and creamier the coffee should be.
n Set the desired fineness for grinding by turning the 'Grinding fineness setting' knob.
!
Caution! : Do note change the setting during grinding.
Never force the grinding fineness setting button
7

PREPARING ESPRESSO AND LONG COFFEES

! Caution! : Your appliance is designed to make coffee from coffee beans only.
When you first make coffee with the machine or after a long period of absence or a
cleaning or scale removal procedure, a little steam and hot water will come out of the
steam nozzle (priming).
Splashing or scalding may occur if the coffee outlets are set too high in relation to the size
of the cups.
7
All manuals and user guides at all-guides.com
1.S
Rinsing out the coffee circuit:
Place a container under the coffee nozzles.
Press the 'Service' button quickly to start a
coffee circuit rinsing cycle, which will
automatically stop after around 40 ml.
Turn to the left for
finer grind.
Rinsing out the steam circuit:
Place a container under the steam nozzle
and press the 'Service' button for
3 seconds to start a steam circuit rinsing
cycle, which will automatically stop after
around 300 ml.
Turn to the right
for coarser grind.