Using The Boost Function - Teka IBC 63 BF100 Manual De Instrucciones

2� Make sure the power display shows "0", and then shows "H"�
3� Turn the whole cooktop off by touching the ON/OFF control�
4� Beware of hot surfaces�
'H' will show up when the cooking zone is hot to touch� It will disappear when the
surface has cooled down to a safe temperature� It can also be used as an energy
saving function if you want to heat further pans, use the hotplate that is still hot�

Using the Boost function

Boost is the function that one zone rises to a high power level in one second and
lasts for 5 minutes� Thus you can get a more powerful and faster cooking�
Using Boost to cook at high power
1� Touch the heating zone selection button that you wish to boost, an indicator next
to the key will flash�
2� Touch the Boost button, the heating zone will begin to work at Boost mode� The
power display will show "P" to indicate that the zone is boosting�
3� The Boost power will last for 5 minutes and then the zone will go back to the
power level which was set before boost�
4� If you want to cancel the Boost during this 5 minutes, touch the heating zone
selection button (an indicator next to the key will flash), and then touch the Boost
button� The heating zone will go back to the power level which was set before
boost�
and then
EN-15