Failure display and inspection
If an abnormality comes up, the induction hob will enter the protective state
automatically and display corresponding protective codes:
Error codes
F3/F4
F9/FA
E1/E2
E3
E5
The above are the judgment and inspection of common failures�
Please do not disassemble the unit by yourself to avoid any dangers and damages
to the induction hob�
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size (L×W×H)
Built-in Dimensions A×B
Cooking Hob
Cooking Zones
Supply Voltage
Installed Electric Power
Product Size (L×W×H)
Built-in Dimensions A×B
Weight and Dimensions are approximate� Because we continually strive to improve
our products we may change specifications and designs without prior notice�
Possible causes
Temperature sensor of the
induction coil failure
Temperature sensor of the IGBT
failure�
Abnormal supply voltage
High temperature of the induction
coil temperature sensor
High temperature of the IGBT
temperature sensor
Technical Data
What to do
Please contact the supplier�
Please contact the supplier�
Please inspect whether power supply
is normal�
Power on after the power supply is
normal�
Please contact the supplier�
Please restart after the hob cools
down�
IBC 63 BF100 / IBC 63100 BF /
IBF 63200 BK/ IBF 63 BK200
3 Zones
220-240 V, 50-60 Hz
6600 W - 7400 W
590 mm X 520 mm X 60 mm
560 mm X 490 mm
IBC 64100 SSS BK / IBF 64200 SSS BK
4 Zones
220-240 V, 50-60 Hz
6600 W - 7400 W
590 mm X 520 mm X 60 mm
560 mm X 490 mm
EN-29