Meter
Probe
model
connectors
HQ1110
HQ1130
HQ1140
HQ2100
HQ2200
HQ4100
HQ4200
HQ4300
Section 3 Specifications
Specifications are subject to change without notice.
Specification
Dimensions (L x W x H)
Weight
Enclosure rating
Power requirements
(internal)
Power requirements
(external)
Meter protection class
Operating temperature
Charging temperature
Operating humidity
Storage temperature
Probe connector
Micro-USB connector
2
pH/mV/ORP probes include temperature
3
LDO/LBOD probes include temperature
4
Conductivity probes include salinity, TDS (total dissolved solids), resistivity, temperature
5
Ion-selective probes such as ammonia, nitrate, chloride, fluoride, sodium
4 English
Table 1 HQ Series meter models
pH/mV/ORP
probes
1
✔
1
1
1
✔
2
✔
1
✔
2
✔
3
✔
Details
22 x 9.7 x 6.3 cm (8.7 x 3.8 x 2.5 in.)
HQ1110, HQ1130, HQ1140 and HQ2100: 519 g (18.3 oz); HQ2200:
541 g (19.1 oz); HQ4100: 530 g (18.7 oz); HQ4200: 550 g (19.4 oz);
HQ4300: 570 g (20.1 oz)
IP67 with battery compartment installed
Rechargeable lithium-ion battery 18650 (18-mm diameter x 65-mm
length, cylindrical), 3.7 VDC, 3200 mAh; Battery Life: > 1 week with
typical use (10 readings/day, 5 days/week in Continuous or Push to
read mode, or > 24 hours in Interval mode with 5 minute intervals and
shutdown timer ≤ 15 minutes)
Class II, USB power adapter: 100–240 VAC, 50/60 Hz input; 5 VDC at
2 A USB power adapter output
IEC Class III (SELV (Separated/Safety Extra-Low Voltage) powered);
USB power adapter is IEC Class II (double-insulated)
0 to 60 °C (32 to 140 °F)
10 to 40 °C (50 to 104 °F)
90% (non-condensing)
–20 to 60 °C (–4 to 140 °F) maximum 90% relative humidity (non-
condensing)
5-pin M12 connector for Intellical probes
The micro-USB connector enables USB cable and USB power
adapter connectivity.
2
3
LDO/LBOD
probes
✔
✔
✔
✔
✔
✔
4
Conductivity
ISE
probes
probes
✔
✔
✔
✔
✔
✔
5
✔
✔
✔