More Detailed Information On Fronius Datamanager 2 - Fronius Galvo 1.5-1 208-240 Manual De Instrucciones

The Technician Wizard is designed for the installer and includes standard-specif-
ic settings. Running the Technician Wizard is optional.
If the Technician Wizard is run, it is essential to note down the assigned service
password. This service password is required to configure the UC Editor and Meter
menu items.
If the Technician Wizard is not run, no specifications for power reduction are set.
The Solar Web Wizard must be run.
6
7
The Fronius Solar.web start page appears.
or
The Fronius Datamanager 2.0 website opens.
More Detailed
More detailed information on Fronius Datamanager 2.0 and other start-up op-
Information on
tions can be found at:
Fronius
Datamanager 2.0
If necessary, run the Technician Wizard and follow the instructions
Run the Solar Web Wizard and follow the instructions
→ http://www.fronius.com/QR-link/4204260191EA
15