The Technician Wizard is designed for the installer and includes standard-specif-
ic settings. Running the Technician Wizard is optional.
If the Technician Wizard is run, it is essential to note down the assigned service
password. This service password is required to configure the UC Editor menu
item.
If the Technician Wizard is not run, no specifications for power reduction are set.
The Fronius Solar Web Wizard must be run.
6
The Fronius Solar.web start page appears.
or
The Fronius Datamanager 2.0 website opens.
7
More Detailed
More detailed information on Fronius Datamanager 2.0 and other start-up op-
Information on
tions can be found at:
Fronius
Datamanager 2.0
24
Run the Fronius Solar Web Wizard and follow the instructions
If necessary, run the Technician Wizard and follow the instructions
→ http://www.fronius.com/QR-link/4204260191EA