Fan; Arc Detection - Fronius Galvo 1.5-1 208-240 Manual De Instrucciones

Currency
Set the currency
Setting range
Feed-in tariff
Set the charge rate for the remuneration for energy fed into the grid
Setting range
Factory setting
CO2 factor
Set the CO2 factor for the energy fed into the grid

Fan

For testing the fan functionality
Setting range
-
-
-
IMPORTANT! The inverter display does not indicate whether the fan is OK. The
fan function can only be checked by listening and feeling.

Arc Detection

for checking arc detection/interruption
Setting range
Arc.det. Status
displays the current status of arc detection/interruption
3-digit, A-Z
2-digit, 3 decimal places
(depends on the country setup)
Test fan #1/test fan #2 (depending on the device)
Select the desired fan using the "Up" and "Down" keys
Pressing the "Enter" key starts the test for the selected fan.
The fan runs until the menu is exited by pressing the "Esc" key.
ArcDetector Status/Start Self-test
31