Example: "WiFi Access Point" menu item
Exiting an entry
If no key is pressed for 2 minutes,
-
-
-
General Menu
1
Item Settings
2
3
The available settings are displayed:
4
5
22
G R A P H
the inverter switches from any item within the menu level to the "NOW"
menu item (exception: Setup menu item "Standby").
The display illumination turns off.
The current power of feeding in is displayed.
Access the desired menu
Use the 'Up' and 'Down' keys to select the desired entry
Press the "Enter" key
Use the 'Up' and 'Down' keys to
select the desired setting
Press the 'Enter' key to save and
apply the selection.
Press the 'Esc' key to exit without
saving.
3
Use the "up" or "down" keys
between the available entries
To exit an entry, press the "Back"
4
The menu level is displayed
The first digit of a value to be set
flashes:
Use the "Up" and "Down" keys to
4
select a value for the first digit
Press the "Enter" key
5
The second digit of the value flashes.
Repeat steps 4 and 5 until...
6
the entire value flashes.
Press the "Enter" key
7
Repeat steps 4 - 6 for units or
8
other values to be set until the
unit or value flashes.
Press the 'Enter' key to save and
9
apply the changes.
Press the 'Esc' key to exit without
saving.
to scroll
key