Control Panel Functions; Connecting To The Smoke It™ App - Pit Boss PLATINUM BRUNSWICK PBV5PL Instrucciones Y Recetas

CONTROL PANEL FUNCTIONS

• SETTING THE SMOKER TEMPERATURE
The Grill Probe measures the internal temperature of the Main Cabinet. When the Set temperature is adjusted, the Grill Probe
will read the Actual temperature inside the Main Cabinet and adjust to the desired Set temperature.
IMPORTANT: The temperature of your unit is highly dependent on ambient outdoor weather, quality of pellets
used, flavor of pellets, and the quantity of food being cooked.
SETTING/ADJUSTING THE SET TEMPERATURE
To adjust the desired Set temperature of the smoker, follow the steps below:
1. Press the Controller Knob. This will make the Set temperature readout blink, to show it is active.
2. Use the Controller Knob again to adjust to your desired temperature.
3. Once the desired Set temperature is reached, press the Controller Knob to confirm the Set temperature,
then the readout will return back to the Actual Temperature.
USING A MEAT PROBE
•
The meat probe measures the internal temperature of the meat in the smoker, similar to your indoor oven. Insert the
stainless-steel meat probe into the thickest portion of the meat. The internal temperature of the meat is shown on the
Control Panel readout. Plug-in the Meat Probe adapter to the meat probe connection port and ensure it is inserted all the
way into the plug. You will feel and hear it snap in place.
IMPORTANT: When placing the meat probe into your meat, ensure the meat probe and meat probe wires avoid
direct contact with flame or excess heat. This can result in damage to your meat probe. Run the excess wire out the
front Main Cabinet door, along the edge. When not in use, disconnect from the meat probe connection port, and
place aside to keep it protected and clean.
CONNECTING TO THE SMOKE IT™ APP
Follow these instructions on how to connect your grill to the Smoke iT™ app with your Android™ or iOS® device. The app will allow
you to control and monitor your grill and meat probe temperatures from your mobile device. Enjoy the benefits that Smoke iT™
mobile connectivity has to offer!
1. Download the Smoke iT™ app. Open the app and allow Bluetooth® to be enabled for setup. New users will need to create
an account and follow the prompts to login.
2. If you are within Bluetooth® range (9 m / 30 ft), the Smoke iT™ app will automatically detect your grill. Select your grill
model. If you do not see your grill on the screen, ensure your unit is connected to a power source and is turned on.
3. Name your grill model (ie. My Smoker) in the app and select "Connect" at the bottom of the screen. This will save your
grill model in the devices menu.
4. From the devices menu, click the grill model to connect. This will show you the control board screen.
5. Click the settings option (gear) in the top-right corner, enter your Wi-Fi credentials, then click the check mark at the
bottom of the screen to connect. Now both Bluetooth® and Wi-Fi (cloud) icons will show on the devices menu, showing
that the grill is connected.
While using the app, the screen will shine bright when the grill is active and connected. If the app screen or grill goes
dark on the devices menu, check your wireless connection or power source.
16