Pit Boss PLATINUM BRUNSWICK PBV5PL Instrucciones Y Recetas página 15

PRIME
PRIME
ACT
SET
NO PELLETS
ACT
E 1 PROBE 2
SET
E
PROBE 1 PROBE 2
ACT
SET
PRIME
PROBE 1 NO PELLETS PROBE 2
PROBE 1 PROBE 2
ACT
SET
ACT
PROBE 1
SET
ROBE 1 PROBE 2
NO PELLETS
PROBE 2
2
Press and hold this button to activate a manual continuous feeding of pellets to the burn pot. Releasing
the button will stop the manual feeding of pellets. This can be used to add more fuel to the fire before
opening the cabinet doors, resulting in a quick heat recovery. It can also be used while smoking, to
increase the intensity of clean smoke flavor. This feature was requested from competition cookers.
ACT
The Controller Knob is used to increase, decrease, and select a setting value. Rotate the Controller Knob
SET
to select the time, temperature, or step in an active settings menu. Push the Controller Knob to confirm
the chosen value.
NO PELLETS
PROBE 1 PROBE 2
The Flame icon visually displays the intensity of the fire in the burn pot. As the temperature increases
from within the Main Cabinet, the color of the Flame will turn from blue to red. The color will also
change when you are adjusting the Set temperature.
The central readout displays both the Actual and Set temperatures. The Actual temperature is constantly
displayed unless the Set temperature is being adjusted. The Actual temperature is the temperature
from inside the Main Cabinet. The Actual temperature readout is taken by the grill probe (sensor) from
the inside of the grill barrel.
NO PELLETS
To show the Set temperature, press the Controller Knob. The Set temperature is active when the readout
ACT
is blinking. To adjust the Set temperature, rotate the Controller Knob, as needed. Once the desired Set
SET
temperature is reached, press the Controller Knob to confirm the Set temperature, then the readout will
return back to the Actual Temperature.
ACT
NO PELLETS
SET
Displays the Actual temperature of a Meat Probe (MP). These two Meat Probe readouts correspond with
the plug-in connection port selected. When not in use, disconnect the Meat Probe from the connection
ACT
port and code "noP" will be displayed. Compatible with Pit Boss® Grills branded meat probes only.
SET
The AUGER icon is visible when the auger is turning. When the central readout has an error code (Err) and
the AUGER icon is blinking, the auger is not working. See the section on troubleshooting for assistance.
The IGNITOR icon is visible when the ignitor is in use. When the central readout has an error code (Err)
NO PELLETS
and the IGNITOR icon is blinking, the ignitor is not working. See the section on troubleshooting for
assistance. PROBE 2
The FAN icon is visible when the fan is in operation. When the central readout has an error code (Err)
NO PELLETS
and the FAN icon is blinking, the Fan is not working. See the section on troubleshooting for assistance.
When the central readout has an error code (Err) and the NO PELLETS is visible, the fire in the burn pot
has gone out and the hopper may be empty. See the section on troubleshooting for assistance.
PROBE 1
NO PELLETS
PROBE 2
15
NO PEL